Countertop Installation in Lynnwood WA - New Tops Set Right and Built to Last

Counters take a beating. Hot pans, wet sponges, and heavy mixers all add up. Most folks call us when the top starts to fail, or when a bigger kitchen project is already underway.

Start by looking around the sink. Our wet climate is hard on counters. Water sits at the seams and along the edges. Laminate and particleboard soak it up and swell. Once the board swells, the top bows and the seams pull apart. That lets in even more water. Mold can then grow in the sink cabinet below, where nobody looks. If you see black spots or smell something musty, call us early.

There are other signs too. Deep cracks and burn marks are common. So are chips that catch your sleeve. You may feel a seam when you run your hand across the top. Tile counters can have grout that keeps staining and crumbling. A top might wobble when you lean on it. Or the sink may no longer sit tight in its cutout.

Many older Lynnwood and Edmonds homes still have counters from decades ago. Those tops were often glued down hard, and the cabinets under them may have years of slow leak damage. Sometimes the cabinets are fine and only need a new top. Sometimes we find soft wood and have to fix that first. We will tell you which one it is before any work starts.

A new layout is another reason. A new sink, a new cooktop, or a moved wall changes where the cuts go. A top cut for the old layout will not fit the new one. It is smarter to plan the counters along with the rest of the job.

Step one is a free visit. We come to your house, look at the cabinets, and measure. We check that the cabinets are level and solid, because a heavy top on a sagging box will crack. Then we talk about what you want. Stone, quartz, butcher block, laminate, and tile all act differently. We explain how each one handles water, heat, and weight, so you pick with open eyes.

Step two is the written quote. It lists the top, the labor, the sink work, and any extras. You see every line before you say yes. Plain counter swaps often do not need a permit. If your job moves plumbing or electrical, we handle the permit in-house. Rules differ some between Snohomish and King County, and we follow both.

Step three is exact measuring. Stone and quartz tops are cut to fit your cabinets before they arrive. A small error here costs real money. So we measure slowly and check twice.

Step four is the tear out. We shut off the water, disconnect the sink and faucet, and lift the old top. This is where we sometimes find rot or mold from years of small leaks. If we do, we show you and fix it before the new top goes down. We cover floors and nearby cabinets so dust stays put.

Step five is setting the new top. We dry fit it first, shim it level, and fasten it. Seams are lined up tight and sealed. Next comes the sink. We fit it, hook the plumbing back up, and test for leaks. Gaps along the wall get sealed so water cannot run behind the counter.

The last step is a walkthrough with you. We look over every seam and edge together. If something is not right, we make it right. Then we haul off the old top and all the trash. Old stone is heavy and awkward, so proper disposal matters. You get your kitchen back clean.

We do not post prices online, because no two kitchens are the same. Here is what moves the number.

The material is the biggest piece. Laminate, butcher block, tile, quartz, and natural stone all sit in very different places. Thickness, edge style, and color change the price too. A rare slab costs more than a common one.

Size and layout come next. More square feet means more cost. Islands, corners, and odd angles need more cutting and more labor. Every cutout for a sink, cooktop, or outlet adds work.

Tear out is another factor. Tops glued down hard or tile set in thick mortar take longer to remove. Water damage hiding under the old top adds repair work. We tell you about that when we see it, not after.

Plumbing matters as well. Reusing your sink is simpler than fitting a new one. A new faucet or garbage disposal adds a line to the quote.

Your estimate is free, and there is no trip fee. The quote is itemized and honest. The price we give is the price you pay, with no hidden fees. If you want to change the plan, we update the numbers in writing first.

John Eric Fernandez learned this trade from his father and has more than 25 years of hands-on experience. JE Remodeling Solutions is family-owned and based right here in Lynnwood. We are a licensed Washington State general contractor, and we are bonded and insured. If something goes wrong, you are protected.

You deal with one person from the first call to the last wipe of the counter. No handoffs and no guessing who is coming. We usually reply in about 30 minutes, Monday through Saturday, 9 to 5. If you have been left waiting by another contractor, you will notice the difference.

We stand behind our work. If something is not right, we make it right. We also clean up properly and dispose of debris the right way.

We serve Lynnwood, Bothell, Seattle, Edmonds, Mountlake Terrace, Shoreline, Kenmore, Lake Forest Park, Woodinville, Kirkland, and Everett, in both Snohomish and King County.